Standards

BS EN 50281-2-1 / ASTM E2021

Test

The Layer Ignition Temperature (LIT) test is conducted to determine the lowest temperature at which a hot surface will ignite a powder when settled as a dust layer.

The material is placed onto an isothermally heated hotplate and formed into a 5 mm layer. Once an ignition temperature is observed the hotplate temperature is reduced and tested repeated with fresh material, until the lowest ignition temperature is established (LIT).

Benefits

The LIT test is one of the three core tests for accessing a materials ignition sensitivity, particularly where ‘Avoidance of Ignition Sources’ is the ‘Basis of Safety’ for the operation. The data is required for defining the maximum operating temperature for electrical and non-electrical equipment used in areas where the test material is present.

Avoidance of Ignition Sources as a Basis of Safety, is often used for processes such as charging vessels from sacks, IBC’s or FIBC’s, pneumatic conveying, milling and tabletting operations to name a few. Many materials, that can create a flammable atmosphere, are found to be insensitive to ignition and therefore it is easy, practical and cost affective to ensure an ignition source capable of initiating a reaction is not present.

Related testing for ‘Avoidance of Ignition Sources’ are Minimum Ignition Energy (MIE), Minimum Ignition Temperature (MIT) and Electrostatic testing.

Get in touch

Please call on +44 (0)1962 840570 and discuss your testing needs with Mike Weaver our Technical Manager (mweaver@sigma-hse.com) or Gavin Rogers our Laboratory Manager (grogers@sigma-hse.com)

Contact us