BS EN 60079-32-2: 2015 / BS 5958 / DIN 51412-1
The test is conducted to establish whether a liquid will allow electrical charge to migrate through it or not and therefore its ability to accumulate and retain charge. The liquid to be tested is slowly charged into a cylindrical, measuring test cell comprising of an inner pole and a concentric outer electrode. A voltage is applied and current is measured from one electrode to the other. Using current value measured, a liquid conductivity is calculated using the test cells constant, determined from its geometry.
The test allows for correct handling procedures to be established. A material with a low conductivity would be considered to be insulating and therefore stop migration of charge. With a charging mechanism present, accumulation of potentially hazardous levels of charge may occur. A material with a high conductivity would be considered to be static dissipative or conductive and freely allow charge to migrate, therefore, providing it is adequately connected to earth, charge accumulation will not likely occur. Charged material can in turn, through induction charging, charge local isolated conductors, which could present an ignition risk if located within a flammable atmosphere i.e. electrically isolated personnel working in a potentially flammable atmosphere where the insulating liquid is either being handled or stored. Conductive materials should equally be treated with caution and always be earthed. Discharges from the surface of a charged, isolated conductive liquid can easily cause ignition of head space vapours.
You may be also interested in...
Powder Volume Resistivity
The test is performed at two controlled relative humidity conditions, an upper humidity of 50% and a lower humidity of 15%, in order to see the changes in resistivity as humidity falls.
Charge Relaxation Time for Powders
The Charge Relaxation Time compliments the Powder Volume Resistivity measurement as it indicates how long a material can retain its electrostatic charge.
Get in touch
Please call on +44 (0)1962 840570 and discuss your testing needs with Mike Weaver our Technical Manager (email@example.com) or Gavin Rogers our Laboratory Manager (firstname.lastname@example.org)